Friday, March 20, 2020
What is Irony The 3 Major Types of Irony (with Examples)
What is Irony The 3 Major Types of Irony (with Examples) What Is Irony and How Should You Use it? Last updated: 04/18/2019Many of us probably know it when we see it, but few of us can articulate what irony really is - much less identify the different types. However, itââ¬â¢s important for writers to understand this literary technique, as it can really add depth to your story - so long as youââ¬â¢re not using it in a hackneyed or incorrect way (like the much-debated Alanis Morissette song).In this article, we will define and analyze the various types of irony and how to use them in your writing. These types include dramatic, situational, and verbal irony, along with their offshoots and related terms. Weââ¬â¢ll also give examples of each type in literature, films, and other media. Finally, weââ¬â¢ll debunk the concept of "rain on your wedding dayâ⬠à - which might be inconvenient but certainly isnââ¬â¢t ironic. The 3 different types of irony how to use them What is irony?Irony is a storytelling tool used to create a contrast between how things seem and how they really are beneath the surface. The term comes from the Latin word ironia, which means ââ¬Å"feigned ignorance.â⬠The three main types used in literature are dramatic, situational, and verbal, as mentioned above.People often conflate irony with sarcasm, coincidence, or bad luck. While these concepts can have ironic characteristics, theyââ¬â¢re not interchangeable with irony.So for example, if you run to catch the bus and miss it by two seconds, thatââ¬â¢s not ironic - unless the reason youââ¬â¢re late is because you were bragging about how you wouldnââ¬â¢t miss the bus. This creates an unexpected and comic contrast to what would otherwise just be an unfortunate situation. More on that later. The stages of dramatic ironyNow that you have a solid handle on what it is, letââ¬â¢s break down the three stages of dramatic irony.à Weââ¬â¢ll use another Shakespearean example, this time from Baz Luhrmannââ¬â¢s Romeo + Juliet (which has an ever-so-slightly different ending from the original play), to illustrate these stages.Stage 1. Installation: the information is presented to the audience, but withheld from the characters. Toward the end of the movie, Juliet fakes her own death to get out of marrying Paris. She sends a message detailing her plans to Romeo, but he never receives it - so the audience knows Juliet isnââ¬â¢t really dead, but Romeo does not.Stage 2. Exploitation: the author uses this imbalance to heighten curiosity and tension. Romeo finds out about Julietââ¬â¢s ââ¬Å"deathâ⬠and buys poison in order to join her in the afterlife. The audience doesnââ¬â¢t yet know whether he will go through with it, however, and they're filled with anguished curiosity.Stage 3. Resolution: the characters find out the truth. In the Baz Luhrmann version, Romeo drinks the poison by Julietââ¬â¢s side, but she awakens from her deep slumber just before he dies. Hence he does, eventually, find out the truth that she was never really dead - but of course, heââ¬â¢s already consumed the poison, which means all they have time for is one final kiss.In this case, the dramatic irony is also tragic irony; the characters in Romeo + Juliet find out the truth just moments too late to stop something horrible from happening. Heartbreaking, no? ðŸââHow else is dramatic irony used?To induce feelings of fear or suspenseAlfred Hitchcock succinctly explains dramatic irony by describing two scenes:In the first, four people are sitting at a table, having a conversation, when a bomb explodes.In the second, we witness an anarchist enter the room, place a bomb under the table, and set it to explode at 1pm. Moments later, we watch as four people sit at th at table and begin a conversation. There is a clock on the wall that reads 12:45pm.In the first scene, we experience momentary surprise. In the second scene, an innocuous conversation becomes charged with prolonged suspense - dramatic irony.For some truly impressive suspense-building, check out this list of the 50 best suspense books of all time.To stir up sympathy for a characterIn the movie Ten Things I Hate About You, high school senior Kat is cold and reserved. After Patrick agrees to woo Kat in exchange for payment from a fellow classmate (who wants to date her sister), we see her warm to him. However, even as they fall for each other, we know that the truth about Patrickââ¬â¢s initial interest in Kat will inevitably come out - consequently, we feel sympathy for her as the reveal draws closer.To create comical situationsIn the season eight finale ofà Friends, Joey picks up Rossââ¬â¢s coat and a ring tumbles out - a ring intended for Ross to propose to Rachel. When Jo ey kneels down to pick it up, Rachel assumes he is proposingâ⬠¦ and accepts.Hilarity ensues as misunderstanding and miscommunication take the day. But of course, ignorance can only remain bliss for so long. Once exploitation is underway, resolution must follow soon after. A character who remains oblivious for too long can start to seem unrealistic to readers, and tension turns to frustration; always keep this in mind when using dramatic irony in a story. Dramatic irony: when readers know something the characters donââ¬â¢t Ã°Å¸Ë ² 2. Situational ironyWhen the truth contradicts an expected outcome, it'sà situational irony - also known as ââ¬Å"the irony of events.â⬠Again, just to clarify, irony is not the same as "coincidence" and "bad luck." If you buy a new car and then accidentally drive it into a tree, that is both coincidence and bad luck. However, if a professional stunt driver crashes into a tree on their way home from receiving a ââ¬Å"best driverâ⬠award, that is situationally ironic.Example of situational irony: Harry Potter and the Deathly HallowsThroughout the seventh book of the Harry Potter series, readers follow Harry on his quest to find and destroy Voldemortââ¬â¢s six Horcruxes. At the end of the novel, we find out that there is a seventh Horcrux, so to speakà - and it's Harry himself.This unexpected twist also comes with the ironic realization that in order for Voldemort to die, Harry must sacrifice himself. So he willingly goes to meet Voldemort - and his own death. But when Voldemort uses the killing curse on Harry, it has the opposite of his desired effect. Harry lives while the Horcrux dies, bringing Voldemort that much closer to his greatest fear: mortality.In this way, Harry being a Horcrux is actually a double case of situational irony. Harry believes he must die in order to vanquish his enemy, whereas Voldemort thinks he is killing Harry, but heââ¬â¢s actually killing himself. Mind = blown, right?How to Write Dialogue: 10 Simple Rules (Plus 5 Mistakes to Avoid!) Read post This does rely on well-planned timing and context, however. A character needs to be properly developed, and the tone of a scene needs to be precisely conveyed, in order for dialogue to come across as ironic. Otherwise, there's a danger that the characterââ¬â¢s statement may go over the readerââ¬â¢s head or be taken literally.For comic reliefOf course, sometimes writers use verbal irony simply to be funny. Whether itââ¬â¢s to highlight a sarcastic character (see: Chandler Bing) or to lighten tension during a dark or difficult scene, verbal irony typically does a very good job of providing comic relief.Final takeawaysHopefully you now understand the general purpose of irony: to create a contrast between appearances and underlying truths. When done properly, this can rather significantly alter a readerââ¬â¢s interaction with, expectations of, and insight into a novel. Indeed, irony is a hallmark of some of the most interesting and sophisticated writing in this day and age.Re member to use it with care, however, as it requires people to read between the lines. Irony can add a lot to the reading experience, but shouldnââ¬â¢t throw us so far off course that we canââ¬â¢t find our way to the truth. With that in mind, go forth and be ironic! (In your story, we mean.)Whatââ¬â¢s your favorite example of irony? Let us know in the comments!
Tuesday, March 3, 2020
8 Skills Youââ¬â¢ll Need for Your Future Retail Career
8 Skills Youââ¬â¢ll Need for Your Future Retail Career Depending on your preferred side of the optimism/pessimism street, the future is either something to worry about, or something to anticipate eagerly. What is true either way is that we donââ¬â¢t really know what will be coming along. However, we do know a few things: there will still be a need for highly qualified retail professionals, and there are skills we can build now to help be prepared for whatever the future retail world looks like. 1. Tech SavvyIf you have a Prime account or have developed a first-name-basis relationship with your package delivery guy or gal because you have so many things shipped right to your door, you probably already know that the retail revolution will only become more digital. If youââ¬â¢re working on future-proofing your retail career, one of the best things you can do for yourself is to get caught up (and keep up) with the tech trends.This doesnââ¬â¢t mean that brick-and-mortar stores will cease to exist in your career lifetime, or that we s hould all just apply for jobs at Amazon and be done with it. Rather, start paying attention to how people are shopping. What devices are they using? What are the conveniences of shopping via tech vs. shopping in person? How can the in-person shopping experience be made better or easier by using technology? Whether youââ¬â¢re a corporate employee, a customer service rep, or a retail associate, being familiar with technology (and its benefits) will make you better able to do your job, because youââ¬â¢ll be equipped to deal with whatever impact apps, online storefronts, or other tech advances have on the retail world.2. Social Media SmartsSocial media has become the go-to place for retail brand ambassadors. Itââ¬â¢s a way to advocate for your store, product, service, or brand, and to directly reach customers. No matter what your role in retail, being well-versed in social media can help you reach more people to build your brand, or- at the very least- collect vast amounts of i nformation on your target customer base.3. Knowledge of Logistics and OperationsThe big push has been to deliver goods and services fast- as close to immediate as logistically possible. That trend is likely to keep continuing in the future, so the logistics end of retail is going to be a major growth area. Strong organizational skills, as well as a passion for getting things from Point A to Point B quickly, cost-effectively, and safely will create an incredibly valuable skill set to bring to your career.And if youââ¬â¢ve got a brilliant plan for making drone deliveries work, well, your future in the retail world is probably very bright indeed.4. A Focus on DataThe future is, unquestionably, grounded in data. We generate data about ourselves and our preferences when we shop, when we browse, when we interact with anything online. But all of that data not only has to go somewhere, it has to be analyzed and turned into ideas that can actually be turned into better customer service, o r an improved bottom line for the store.And ââ¬Å"dataâ⬠can seem like a daunting, faceless skill that might not have a direct impact on your own career, but it actually creates lots of different opportunities for people in the field. It increases the demand for Information Technology professionals in retail who can capture and present the data, as well as analysts who can turn it into goals and processes for a company, and also managers, associates, and customer service professionals who can take all of that upstream information and use it on direct sales and customer experience.You also donââ¬â¢t need an advanced degree in IT or engineering to bump up your data analytics skills. You can use free online analytics tools (like Google Analytics) to start building a base of knowledge about how people interact with information, what kind of information you can get about people, and how that might affect business decisions. There are also free online courses you can take to star t building your data analysis skills.5. A Knack for Customer ServiceGreat customer service skills never go out of style, and they will continue to be crucial in future retail. This goes hand-in-hand with the social media savvy we talked about before, because so much of the customer/consumer experience is rooted in digital platforms: looking for product information, needing help troubleshooting, and giving feedback.The trick for the future of customer service will be adapting those traditional customer service skills to a digital environment, one where you may never face or talk to the customer. There are also additional layers of accountability for the customer service rep in the future, as customers have more and more avenues to talk about their experience with a company. (Iââ¬â¢m sure weââ¬â¢ve all cringed at some of the viral stories about customers who have been stonewalled, insulted, or worse by bad customer service, made instantly public via social media.) The future of customer service will be balancing the companyââ¬â¢s bottom-line needs with the realities of working with customers.6. Knowledge of Behavioral FinanceFinance and financial theory are skills and knowledge that have always been essential in retail, and always will be. However, ââ¬Å"behavioral financeâ⬠is a relatively new concept. It combines economics with psychology to help guide and understand financial decision-making. Understanding why people make the financial decisions they do (like, say, purchasing one product and not another) is, like data analytics, a skill that will become very valuable in the retail world.7. Design and Merchandising TalentConsumers have come to expect a certain level of design sophistication from retailers, and that trend is not likely to reverse any time soon. Stores and companies are also increasingly focused on behind-the-scenes design and merchandising strategies, meant to steer the customer toward purchases without him or her even realizing it. Professionals with an understanding of how design engages customers, and how to maximize that, will bring a very useful skill set to a retail career.8. FlexibilityAnd donââ¬â¢t forget a basic personal skill that will come in very handy in the world of future retail: adaptability. This is an important skill to have no matter which industry youââ¬â¢ve chosen to build your career- after all, very few companies are interested in someone who says, ââ¬Å"this is how things are done now, and thatââ¬â¢s just how it should be forever.â⬠But flexibility is an especially crucial skill for retail. Look at how things have changed in the past 10 or 15 years for retail, as behemoth companies like Amazon and Walmart have shaped how and where we shop. And as technology upgrades and peopleââ¬â¢s needs change and evolve, there is no reason to think that the current status quo will hold for the future. An openness to change, to innovate, or to say ââ¬Å"we can do this better,â⠬ is an outlook that will help you survive and thrive as a retail professional in any environment.Retail, like all industries, will continue to evolve- and if you start working on skills now that will make you a smarter and more adaptable professional later, youââ¬â¢re setting yourself up for an even more successful career.
Sunday, February 16, 2020
Argument - the Aeneid was a pro-Augustan work which can be seen Essay
Argument - the Aeneid was a pro-Augustan work which can be seen through the themes, arguments, and specific scenes of the Aeneid - Essay Example Associations with Augustus The associations with Augustus in the work of ââ¬Å"The Aeneidâ⬠are first seen through the direct quotes that describe the political scene of the time and how Augustus was meant to be a powerful leader. Virgil states this by associating Augustus with the line of Caesar while showing how this automatically leads to him being an exalted leader. He states ââ¬Å"Caesar himself, exalted in his line; / Augustus promisââ¬â¢d oft, and long foretold, / Sent to the realm that Saturn rulââ¬â¢d of old; / Born to restore a better age of gold, Africa and India shall his powââ¬â¢r obey; / He shall extend his propagated sway / Beyond the solar year, without the starry wayâ⬠(Virgil, 192). The direct reference in this quote shows Augustus as the promised leader, not only for Greece, but also as ordained with the time, planets and alignment of the stars. This creates a belief system from the direct reference to the leader, showing him as a natural leade r that was meant to rule over other countries and to become one of the most powerful and influential individuals of the time. Actions throughout the Aeneid The direct reference pointed out with ââ¬Å"The Aeneidâ⬠is followed by specific actions and situations that show the same political propaganda. The first six books of the journey are written as a part of the Underworld in which all men are in. The hellish state is one which becomes symbolic of how life has been to this point in the ancient city. In book 6, there is a specific shift that leads to the belief that the situation will be overcome. The actions which follow after the journey lead to the Trojan War and the victory of the land. The beginning of this is when Aeneas is given the golden bough and is told to leave the underworld. The propaganda is based on Aeneas leading the city out of a state of hell and into a sense of life giving and an end to human suffering. The references of these actions throughout the plot lin e are known to relate directly to the celebration of the new political leadership of the time as well as the overthrow of the old government and the desire to have Augustus in power to overcome the darker ages of the city (Minson, 48). There are several moments which point to the happiness of the city and what can be after changes occur. More important, the author points to the ideals of victory which he believes are most important to the bringing in of Augustus as a leader. The main association is with the Trojan War and how this led to the rightful place of the city mentioned. Virgil refers to this with the past state and how the time was better because of the triumph and the alterations in leadership which occurred. He states ââ¬Å"Relate what Latium was; her ancient kings! / Declare the past and state of things, When first the Trojan fleet Ausonia sought, / And how the rivals lovââ¬â¢d, and how they fought. / These are my theme, and how the war began / And how concluded by t he godlike manâ⬠(Virgil, 198). The recounting of the Trojan war then leads to an understanding that this was led first by politicians and was followed by those who moved according to the strategies desired by the land. The propaganda of the war then leads to one referencing the Augustan leadership while showing that this was the main reason why the victory occurred among the land. Themes of Politics The actions which
Sunday, February 2, 2020
The current world order is characterized by the exploitation of its Essay
The current world order is characterized by the exploitation of its workers - Essay Example The current world order is characterized by the exploitation of its workers A sizeable number of people are of the opinion that capitalism is the best model for society. Karl Marx was one of these individuals who opposed fervently on the consequences of capitalism on society and a country. In his philosophical works, Marx detailed the adverse effects of this economic model. In his sociological theories, Marx defines capitalism as the key factor that divides society into classes (Rupert, 2003, p183). These classes are because of their relationship to the various factors of production available in the country (Hoffman n.d, p235). According to Karl Marx, capitalism thrives on profits derived from the factors of production available. Corporations exploit their laborersââ¬â¢ wages to derive these profits; the corporations cannot be profitable without exploitation of workers (Bacher, 2007, p37). This conclusion by the Marxists is correct in accordance to the labor theory of value. This theory claims that the value of the product is dependent on the amount of labor put into producing the product (Rupert, 2003, p187). The workers create the value of the product. The returns obtained from the sale of the product are divided into profits, wages and cost of raw materials. This division of the returns favors the cost of raw materials and the profits generated by the corporation (Reiff, 2013, p41). The workersââ¬â¢ wages are neglected and do not reflect the actual value of their input into the finished product.
Saturday, January 25, 2020
Isolation And Observation Of Bacteria Using Pure Culture Methods Biology Essay
Isolation And Observation Of Bacteria Using Pure Culture Methods Biology Essay INTRODUCTION Bacteria are found everywhere (Campbell Reece, 2005). They have the ability to colonize almost all habitats which means they come in wide varieties of forms. Understanding bacterial structure can therefore make it possible to understand their functions and survival. For example, just by studying the capsule layer of bacteria, one can get an idea of the pathogenicity of the bacteria. But they grow among diverse and mixed populations, where it is impossible to study a single species of bacteria. Thus it is necessary that the pure culture of bacterial colonies be obtained for studying. Pure culture is defined as a mass or group of cells arising from the same parent cell. Pure culture techniques, such as streak plate, pour plate and spread plate, isolate bacterial colonies from mixtures so that colonies comprising of the identical organisms can be studied. Isolation of pure culture is vital for characterizing a single species of bacteriaà otherwise presence of contaminants can lead t o inaccurate observations (Prescott et al., 2005) Then the isolated bacterial colonies undergo incubation at 370C for 24 hours for all the three plates, after which, a colony can be selected and isolated again to obtain pure cultures. Another step in the experiment is to perform a differential staining method known as Gram staining, which mainly differentiates the bacteria into two categories: Gram positive and Gram negative based on their cell wall structures (Campbell and Reece, 2005). The species of bacteria present in the given broth culture were Escherichia Coli, Staphylococcus Aureus and Bacillus Cereus. The appearances of these bacteria known in theory state that Escherichia Coli are Gram negative and rod-shaped; Bacillus Cereus are Gram positive and rod-shaped while Staphylococcus Aureus are Gram positive and cocci. So the experiment was carried out to see if it was possible to obtain pure cultures from mixed broth by applying streak, spread and pour plate techniques. AIMS The main objectives of this experiment were to understand the purpose, principles and techniques of Gram staining as well as the isolation of pure cultures. The experiment further aimed to compare the different isolation techniques, namely streak plate, spread plate and pour plate in terms of producing pure cultures, and also compare the morphological features of three types of bacteria. MATERIALS AND METHODS The procedure was carried out according to the instructions stated in the pages 32-36 of the Microbiology lab manual (MIC2011, Class Notes, 2011). RESULTS (combined with Morning Lab, Bench 1, Group A3) The entire experiment was carried out in three different sessions. Session 1 A broth culture, labelled as Culture 2, was provided and it was known to contain a mixture of Staphylococcus aureus, Escherichia coli and Bacillus cereus. Sample from the broth culture was heat-fixed and then gram stained for observation under the light microscope. Three different types of bacteria were seen and their identifiable characteristics were matched with the three kinds of bacteria known to be present in the mixture. Table 1 Observation of Culture 2 (the broth culture) and characterisation of the types of bacteria seen under the microscope Species Cellular Morphology Type of Bacteria Gram Stain Shape Arrangement Type 1 (Gram +ve) Purple Coccus Cluster Staphylococcus aureus Type 2 (Gram -ve) Pink Rod (shorter) Single/Pair Escherichia coli Type 3 (Gram +ve) Purple Rod (longer) Chain Bacillus cereus After the presence of all three types of bacteria was confirmed, loopfuls from the broth culture were taken in order to prepare pure cultures using three isolation techniques streak plate, spread plate and pour plate. Once the three isolation plates were ready, they were incubated overnight at 37à °C for the next session. Session 2 After overnight incubation at 37à °C, the colonies which formed on the streak, spread and pour plate were observed under the microscope to see the distribution and the morphology of bacterial colonies. These isolation techniques helped determine which bacteria were responsible for the colony morphology. Table 2 Distribution and observation of bacterial colonies present in streak plate, spread plate and pour plate, after one-day incubation at 37à °C Appearance of Bacterial Colonies Streak Plate Spread Plate Pour Plate Distribution Primary inoculum and initial streaks were overlapping while the final streaks were distinct and separate Overlapping and could not be differentiated Overlapping and could not be differentiated Density High Higher Highest Location Few large colonies present on the surface of the agar Overlapping colonies present on the surface of the agar Distributed on the agar surface as well as within the agar medium Other Features Various features were noted among different colonies Opaque, irregular, smooth and flat White and opaque Since distinct and well-isolated colonies were not found from the spread plate and pour plate techniques, selection of distinct and clear colonies of all three types of bacteria were made from the streak plate and observed under the microscope. Table 3 Morphology of the bacterial colonies Appearance Colony 1 Colony 2 Colony 3 Shape Circular Circular Irregular Size Small Medium Large Surface Smooth and glistening Smooth and glistening Rough and dull Elevation Flat Convex Raised Color Pale yellow Yellow White Edge Undulating Smooth Undulating Opacity Opaque Transparent Opaque Identity Staphylococcus aureus Escherichia coli Bacillus cereus Session 3 The isolated colonies were incubated overnight at 37à °C and inoculated onto new nutrient agar (NA) plates, after which pure plates of each type of bacteria were prepared and Gram stained followed by the observation of single colonies of bacteria under the microscope. Table 4 Observation of cellular and colonial morphology Type of Bacteria Colony Morphology Cellular Morphology Gram Stain Shape Arrange-ment Other Features Staphylococcus aureus Smallest in size; circular; flat; smooth surface and undulating edges; pale yellow and opaque (Gram +ve) Purple Coccus Cluster Pure culture was extracted. No contamination. Escherichia coli Medium in size; circular; convex; smooth surface and edges; yellow and transparent (Gram -ve) Pink Rod (shorter) Single/ Pair Pure culture was extracted. No contamination. Bacillus cereus Largest in size; irregular; raised; rough surface and undulating edges; white and opaque (Gram +ve) Purple Rod (longer) Chain Pure culture was extracted. No contamination. DISCUSSION (1) As seen in the table-4 of results, Bacillus cereus had the largest colony with irregular shape, raised elevation, rough and dull surface, undulating edges, opaque and white in colour. They are Gram positive and rod-shaped, which are arranged in chains. The moderate-sized colony was the Escherichia coli with a circular shape, convex elevation, smooth and glistening surface, smooth edges, transparent and yellow in colour. They are Gram negative and are seen under the microscope as short rod-shaped structures existing in pairs or single cells. The smallest of all colonies belonged to the Staphylococcus aureus, with a circular shape, smooth and glistening surface, undulating edges, opaque in pale yellow in colour. They are Gram positive cocci arranged in grape-like clusters and they do not form spores (Mahon et al., 2007). The cellular morphology of bacteria was observed by Gram staining while the colony morphology was seen using streak plate technique. The morphology of each bacterium observed in the pure cultures matched with those in the original mixture, but the colony size in pure culture was much bigger than those in mixed culture. The probable reason for this is that multiple bacterial colonies experience competition for nutrients while colonies in pure culture had sufficient food and space. No contamination was found and individual bacterial colonies were separated on an agar surface. (2) Among the three techniques used, streak plate is the most efficient way to produce well-isolated colonies, or in other words, pure colonies. In streak plate technique, the microorganisms containing many viable cells, were directly plated. However, in order for the technique to work well, there must be large populations of the organism in the original mixture (Sumbali and Mehrotra, 2009). Otherwise, the final streaks result in less or no colonies because in the streak plate method, the bacterial suspension is diluted more and more as it proceeds from the primary inoculums towards the latter streaks. Streak plate is a cost-effective and rapid-active method for separating bacteria in mixed cultures of high density and can also be repeated for achieving the desired purity. For these reasons, streak plate technique is widely used in laboratories (Pommerville, 2010). One disadvantage of streak plate is that the risk of contamination is higher since the plate is exposed to air for sever al times (Sumbali and Mehrotra, 2009). For more diluted populations, spread plate and pour plate are considered since they are easy to locate colonies among low density of evenly distributed populations (Willey et al., 2011). Serial dilutions reduce the microbial population (Willey et al., 2011). For spread plate, 0.1 ml of the bacterial suspension was taken from 10-2 dilution and spread over the agar whereas for pour plate, 1 ml of the suspension was taken from the 10-2 dilution. Although spread plate can separate a bacterial colony and it is more aseptic than streak plate, it is not feasible for isolating colonies from a mixture because the method is time-consuming and the colonies are not easily differentiated. However streak plate can be used to count microbial populations (Prescott et al., 2005). Similarly, pour plates are also used for counting microbial populations. Although it has the least risk of contamination, the process is time-consuming and the colonies are hard to dis tinguish or count since the colonies also grow inside the agar, for which this technique is not used to isolated colonies from a mixture. Pour plate is used for isolating and counting anaerobic bacteria since these microbes cannot survive in atmospheric levels of oxygen and are therefore only found within the agar and not on the surface of the agar (Hogg, 2005). (3) Gelatin is colourless, brittle and translucent medium (Willey et al., 2011). In this experiment, agar was used as the culture medium. Agar is preferred over gelatin for making solid media because of several reasons. First of all, unlike gelatine, agar contains complex polysaccharides that cannot be nutritionally digested or degraded by most microorganisms to form precipitates, since the incubation temperature of agar is about 20à °C, which is below the optimum temperature of most organisms and this enables the agar to remain solid when microorganisms are growing on it (Hogg, 2005). Secondly, agar sets firmly and strongly, providing a stable culture medium (Willey et al., 2011). Moreover, agar has a wide range of pH from 5 to 8 and also solidifies below 40à °C, for which liquid agar can be poured over the temperature sensitive nutrients without damaging them. Furthermore, the melting point of solid agar is above 100à °C and therefore can be used to culture thermophiles (Bauman, 2006). Finally, agar, being porous, can also show motility of the bacteria (Prescott et al., 2005). (4) Unlike bacterial colonies with heavy growth, the well-separated colonies do not have shortage of food or space, which prevents over-crowding and competition for resources and thus the bacterial growth rate is higher, for which they appear larger. Growth rate of bacterial cells in well-separated areas is further enhanced by the higher diffusion rate of the oxygen uptake by the cells and releasing of toxic metabolites out of the cell (Willey et al., 2011). On the other hand, bacteria in areas of high growth face competition for food and space for which their growth rate as well as survival rate is lower. This is probably the reason why Staphylococcus aureus, grew initially, but then stopped. In this experiment, once the bacteria were isolated, they were Gram stained and checked to ensure that no contamination had taken place and that each colony had single species of bacteria. (5a) An individual colony might contain more than one type of bacterium due to contamination. Common reasons for contamination are improper sterilization of inoculating loop or absence of aseptic techniques or sometimes even under sterilized environments. Contaminants are also present in the extracellular slime layer of bacteria and also in those bacteria which are joined in a network of chains. Another reason for not having the same type of bacterium in a colony, although very rare, is mutation and this results in the presence of multiple mutant strains of bacteria being present in a single colony (Pommerville, 2010). (5b) Bacteria reproduce asexually by a process called binary fission where a parent cell divides into and subsequent divisions take place. In this way, a colony can arise from multip le cells of same or different species of bacteria which are deposited together on a solid medium and this is how a colony may not always have the same parent cell. Even when bacteria exist in clusters, not necessarily are they from a single parent cell (Hogg, 2005). (6) Passing the dried smear through the Bunsen flame is known as heat fixing. By doing so, the microorganisms are killed and attached firmly to the slide due to the coagulation of the proteins; otherwise they would wash off with the stains. Heat fixing also alters the structure of the microorganisms, preserving the general morphology, so that they become permeable to stains (Sumbali and Mehrotra, 2009). (7) A whole colony would result in a thick smear, which not only appear overlapping and crowded under the microscope, but also prevent the diffusion of the dyes across the cell, for which the alcohol would not be able to effectively decolorize the cells, causing majority of the cells to be stained purple. Also different types of bacterial cells have different staining methods which may get confusing. Therefore, it would get very difficult to identify individual cells. (8) There is no association between bacterial cell shape and reaction to Gram stain. Gram staining depends on the thickness of the bacterial cell wall which is composed of peptidoglycan. Peptidoglycan consists of abundant teichoic acid, a thin layer of periplasmic space and a peptide interbridge (Prescott et al., 2005). Both Gram positive and Gram negative bacteria come in various shapes. For instance, Staphylococcus aureus (coccus-shaped) and Bacillus cereus (rod-shaped) are both Gram positive. (9) The bacterial cell wall structure determines its Gram stain reaction. Bacterial cell walls are composed of peptidoglycan which maintain rigidity and shape of the bacterial cell and also give protection from osmotic lyses (Prescott et al., 2005). However, in Gram positive bacteria, 90% of the cell wall is made up of peptidoglycan, for which the cell walls in Gram positive bacteria is thicker than in Gram negative bacteria where the peptidoglycan content is only 5 to 20%. The decolourisation depends on the peptidoglycan content in the cell wall and therefore determines whether the cell will be Gram stained or not. Upon addition of alcohol, the pores of the thick peptidoglycan layers shrink in the cell wall of Gram positive bacteria, which results in dehydration of the layer and retaining of the stain, for which they appear purple under the microscope. As for Gram negative bacteria, the alcohol wash opens the pores of the peptidoglycan layer and the stain is not retained in the pept idoglycan layer (Prescott et al., 2005). (10) The step which is very crucial in determining the outcome of Gram staining is the decolourisation with alcohol. The cell wall structure of Gram positive bacteria allows the crystal-violet iodine dye complex (CV-I complex) to be retained within the thick peptidoglycan layer when alcohol is added. On the contrary, the cell wall structure of Gram negative bacteria allows the CV-I complex to be removed from the peptidoglycan layer upon addition of alcohol. It is for the decolourization step that the Gram negative bacteria appear pink when counterstained with Safranin and Gram positive ones appear purple, otherwise CV-I complex would be present in both types of bacteria and both would be seen purple under the microscope. (11) Nonetheless every step in Gram staining is necessary to obtain the correct result. If any of the steps is eliminated, the results can change and are misleading. The table below shows the various outcomes when the steps in Gram staining are changed. Table 5 Results from altered steps in the Gram staining process: A B C D Staphylococcus aureus (Gram positive) Pink Pink Dark purple Dark purple Escherichia coli (Gram negative) Pink Pink Dark purple Colourless Bacillus cereus (Gram positive) Pink Pink Dark purple Dark purple When crystal violet wash is eliminated in step A, none of the cells will get the purple colour and thus all cells are stained pink when washed with Fuchsin. In step B, when the iodine wash is eliminated, the CV-I complex does not form and the crystal violet molecules are not large enough to be retained in the peptidoglycan. Thus they are washed off with the water and alcohol, for which even the Gram positive cells appear pink. In step C, with the elimination of alcohol wash, decolourization is not done, for which all cells, including the Gram negative one where the CV-I complex masks the pink colour, are stained purple (Willey et al., 2011). When Fuchsin wash is eliminated in step D, no change is brought on the Gram positive cells, but the Gram negative cells appear colourless, the reason being that after washing off the crystal violet with alcohol, no counterstain is added to the Gram negative cells (Willey et al., 2011). A limitation in this experiment is not performing the Gram stain when the species of bacteria were identified on the streak plate and again streaked on the nutrient agar plates. The bacterial species were of taken based on their colony morphology. However a Gram stain could have confirmed if the colonies comprised of the expected bacteria or not. CONCLUSION It was mandatory that aseptic techniques be followed when experimenting with microorganisms. Compared to spread plate and pour plate techniques, streak plate was found to be the most efficient and also the easiest way to isolate bacterial colonies. Pure cultures of three types of bacteria that were obtained included Staphylococcus aureus (rod-shaped and Gram positive), Bacillus cereus (cocci-shaped and Gram positive) and Escherichia coli (rod-shaped and Gram negative). Other than that, importance of heat fixing and Gram staining was understood. Gram staining proved to be a very good method for observing the bacterial cellular features and hence, differences between Gram positive and Gram negative bacteria were clarified. It was also understood that reaction of a bacterial cell to the Gram stain is determined by the decolourization step.
Friday, January 17, 2020
Playing Monopoly Essay
1. Identify the behaviors that you think are ethically questionable in the history of Microsoft. Evaluate the ethics of these behaviors. Pretend to embrace a technology and become the major source for that technology like buy out the competitors. Declare it obsolete because your original way is better. Wait long enough for a technique or idea to be forgotten by the majority of people or just long enough that the majority of your followers are naive newbies. Bring out the old idea and present it as a new invention. For example, many things in Visual Studio .Net are presented as new ideas even though they have existed in RAD tools like Delphi for over a decade. Why this works? because the majority of new software geeks have no idea what Delphi is and didnââ¬â¢t know that you could do everything exactly the way Microsoft claims you can in their ââ¬Å"newâ⬠invention. It is very much clear about incidences that Microsoft has been unethical in its approaches. Rather that applying their own thoughts, most of the products they have released by copying ideas unethically from other competitorââ¬â¢s products. Rather than having the fair competition in the market Gates always tried to monopolize the market. Though all the monopoly has brought him profit but ethically Microsoft didnââ¬â¢t. 2. What characteristics of the market for operating systems do you think created the monopoly market that MIcrosoftââ¬â¢s operating system enjoyed? Evaluate the market in terms of utilitarianism, rights and justice (your analysis should make use of the textbookââ¬â¢s discussion of the effects of monopoly markets on the utility of participants in the market, on the moral rights of participants in the market, and on the distribution of the benefits and burdens among participants in the market), giving explicit examples from the operating sytems industry to illustrate your points. Some of the characteristics of the market that created monopoly market that Microsoftââ¬â¢s operating system enjoyed are as follows: Incorporation of various Microsoft applications like Windows Digital Media Player andà Internet Explorer in 1995 with its operating system gave an advantage to the company as this monopoly worked out for them. Users using Windows didnââ¬â¢t want themselves to get into trouble of purchasing a different browser and different Media Payer. Users were also not ready to pay extra money for buying other companiesââ¬â¢ applications, as all those applications were readily available with Microsoftââ¬â¢s operating system. Every company was releasing their applications and operating systems in the market and every time Microsoft was able to know their programs. Using those programs Microsoft created monopoly in the market by releasing advanced version of competitorsââ¬â¢ products. As when Navigator came in 1994, Microsoft launched Internet Explorer which was borrowed from Spyglass Inc. and made it similar to Navigator. It incorporated Internet Explorer with Windows. Media player was also incorporated in Windows. Sun Microsystemsââ¬â¢s Java was also licensed to Microsoft first and then Microsoft built its own Microsoft java permitting Windows Users to be compatible with it.In the software industry users did not want to shift to new products or applications until proper training and workshops are organized. Microsoftââ¬â¢s used good strategies for training users. With the Installation disk, a proper tour of Windows is provided to facilitate user. 3. In your view, should the goverment have sued Microsoft for vilolation of the antitrust law? In your view, was judge Jacksonââ¬â¢s order that Microsoft be broken into two comanies fair to Microsoft? Was judge Killar-Kotellyââ¬â¢s november 1, 2003 decision fair? Was the April 2004 decision of the Eruopean Comission fair to Microsoft? Explain your answers. USA Attorney General Janet Reno filed an antitrust suit against Microsoft in the court of Judge Thomas Jackson. Microsoft made the computer companies using Windows as their operating system not to license, distribute or promote competitive software products of other companies. It embedded Internet Explorer with Windows and thus demolished consumer freedom to go for any other Browser plus it also degraded windows performance. In the agreements with computer companies those using Windows, Microsoft wanted them to leave Internet Explorer as the default Webââ¬âBrowser and didnââ¬â¢t allow installation of any other browser. The judge was having complete authorityà to take hard actions against Microsoftââ¬â¢s unethical business strategies. As per the case study it is evident that Microsoft has used various unethical business strategies to make their business profitable. Microsoft copied the copyright of Appleââ¬â¢s OS/2 and developed its own operating system on the same line . Moreover they forced users to use its Internet Explorer and digital media player. They suppressed the platform independent functionality of Sunââ¬â¢s Java by releasing Microsoftââ¬â¢s Java and making it cross platform language. In my view, government should not have sued Microsoft. Consumers were well satisfied by Windows which was evident from the market share of its use. So signing of agreement involves approval of computer companies and Microsoft and if computer companies have signed that agreement that means they werenââ¬â¢t having any problems and neither consumers upon implementing the agreement. So Microsoft just used a marketing strategy over here. Judge Jacksonââ¬â¢s order was fair for the competitors as well as for the software industry because Microsoft has really invoked the monopoly situation in the market. It was essential to have fair competition in the market. As an operating system and applications are totally two different aspects and Microsoft should no t club these two aspects. This order would have helped competitors and users to choose their favorite applications. From Microsoftââ¬â¢s point of view it was not the fair decision, as they never wish to separate their business into two domains. It was a marketing strategy adopted by Microsoft so that it can withstand with the competition. According to them it also facilitated consumers for not spending their money in buying other corresponding software and also playing a risk of installing and uninstalling. According to the settlement between Microsoft and DOJ, Microsoft was asked to share its application programming interface with other software rivals and to allow users to hide Internet Explorer icon from the screen. It was asked not to prevent other competitors programs to install on its operating system and not to retaliate against computer makers in releasing their products. This settlement was officially approved by Judge Kollar-Kotelly on November 1, 2003. The decision was really fair for the competitors as well as users. The decision has created free competitive market in the software industry. It allows users to use other available applications and allow them to hide icons which they do not want to use. From competitors point of view market became much more open to release moreà products with advanced techn ologies. This move also helped people to think out of Microsoftââ¬â¢s box and helped to showcase their technical skills. As a result various new operating systems with better performance than Windows like Linux, Suse, Knoppix, and Solaris came in market. 4. Who, if anyone is harmed by the kind of market that Microsoftââ¬â¢s operating system has enjoyed? Explain your answer. What kind of public policies, if any, should we have to deal with industries like the operating system industry. Monopoly of Microsoftââ¬â¢s operating system has harmed everyone from users to computer producers. Due to unavailability of fair market the users were bound to use Microsoftââ¬â¢s operating system and applications. They were unable to hide icons of the Microsoftââ¬â¢s applications from their operating system. From producerââ¬â¢s point of view, they were not free to launch Windows compatible applications due to unavailability of Windows application programming interface in the market. The competition became minimal in the market due to monopoly enjoyed by Microsoft. Due to monopoly in the market one single company Microsoft was holding maximum market share. It hampered the technical advancement and innovation in the market as well. Some of the following public policies could be used to deal with monopoly Government should issue some standards for a given technol ogy/system/product which should be followed by everyone in the industry. Anti-monopoly law can be created to prevent monopoly to occur in the market. Some policies can be incorporated in the system to motivate and encourage newly launched companies to increase the innovation in the market. Some policies should be made to share information among the companies whose applications are inter dependant.
Thursday, January 9, 2020
Subscribe to:
Posts (Atom)